HomeFeatures

3D printing:Youngstown helps the Air Force test new manufacturing technique

Reservists pose with the first AAM piece to be fitted on a C-130H.

Chief Master Sgt. Darin Wesoloski, Senior Airman Sabrina Baechel and Master Sgt. Scott Obermiyer, all assigned to the 910th Maintenance Squadron, Mark Diller and Yvonne Martino from the University of Dayton Research Institute, and Jesse Holdaway from the Air Force Life Cycle Management Center, pose for a photo with the first Advanced Additive Manufacturing piece to be fitted onto a C-130H Hercules. (Senior Airman Christina Russo)

Master Sgt. Scott Obermiyer installs the first Advanced Additive Manufacturing piece.

Master Sgt. Scott Obermiyer installs the first Advanced Additive Manufacturing piece to be fitted onto a C-130H Hercules on one of Youngstown Air Reserve Station’s C-130s. (Staff Sgt. Jeffrey Grossi)

Master Sgt. Scott Obermiyer and Senior Airman Sabrina Baechel install the first Advanced Additive Manufacturing piece

Master Sgt. Scott Obermiyer and Senior Airman Sabrina Baechel install the first Advanced Additive Manufacturing piece to be fitted onto a C-130H Hercules on one of Youngstown Air Reserve Station’s C-130s. (Senior Airman Christina Russo)

Imagine you’re camping in the woods in your favorite 1982 off-road, full-suite recreational vehicle. One day you close your kitchen cabinet door a little too hard and it falls of the hinges and cracks in half.

You are miles away from civilization, so you make some calls and find out parts for your RV model haven’t been produced for 10 years. The provider is willing to temporarily restart production, but you have to purchase at least 50 spare doors.

To make things worse, the parts will take a month to manufacture and can’t be shipped to your campsite. That means your family has to stop what they are doing to drive out of the middle of nowhere to get of one of your 50 new cabinet doors.

Given the logistical hurdles, it would likely be easier to tape the door back together, deal with it or go home and call the trip a loss.

The Air Force faces situations like this on a regular basis. But unlike your RV, a multi-million dollar military aircraft in a deployment zone can’t be safely repaired with tape and it can’t leave because it has a mission to complete. The only option is for the plane to remain grounded until the needed parts are delivered and the necessary repairs are made. The process can greatly impede the mission.

With Advanced Additive Manufacturing, aircraft parts can be 3D printed in the field and installed in a manner of hours for a fraction of the cost. But before a part can be field printed, someone has to test it.

That’s where the 910th Airlift Wing, Youngstown Air Reserve Station, Ohio, comes in.

On Aug. 5, the first AAM part fitted on a C-130H Hercules aircraft – a utility hydraulic panel – was installed on one of Youngstown’s C-130s.

Youngstown participated as a proof-of-concept testing base for the University of Dayton Research Institute, which was contracted by the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, Ohio.

The AFLCMC is responsible for tech transition for Air Force sustainment. The panel was printed through fused deposition modeling at the Air Force Advanced Technology and Training Center in Georgia. UDRI designed, prepped and delivered the panel. Fused deposition modeling uses thermoplastics heated to their melting point to create a three-dimensional object layer by layer.

The utility hydraulic panel is a high-wear, low-risk, non-flight essential part with a high replacement demand within the Air Force’s C-130 fleet.

Chief Master Sgt. Darin Wesoloski, the fabrication flight chief assigned to the 910th Maintenance Squadron, helped bring AAM to the squadron’s fabrication shop.

“The ability to print the parts we need enables us to meet the demand of the customer now, versus waiting for the process of finding a manufacturer capable of producing the part,” Wesoloski said. “The typical way of manufacturing is costly and time-consuming.”

The Air Force’s 3D capability is still in its infancy, but with the 910th Airlift Wing and other installations’ help, it’s starting to take its first steps.   #ReserveReform #ReserveReady

(Tancer is assigned to the 910th Airlift Wing’s public affairs office.)

Social Media

Facebook Twitter
Air, Space and Cyber Space: Total Force family has all the bases covered - https://t.co/KkifNhfcmf #ReserveResilient
Ready to Go: First Reserve group completes Ground Surgical Team training course - https://t.co/4vRSOFQu8i… https://t.co/gTyHSqV74W
Chief uses resiliency to survive tragedy, vows to help others - https://t.co/MDifKPnrps #ReserveResilient https://t.co/tMPYuwW7uL
#ReserveReady: C-130 crews sharpen their skills at exercises across the globe - https://t.co/wKzYxA8p9S (Story by t… https://t.co/loklvSM3o6
Guardians of the Galaxy: Reserve missileer sits alert for first time in @usairforce history -… https://t.co/NoSowVWJUA
Going the Distance: Reserve optometrist dedicated to humanitarian causes, running marathons (Story by the @514AMW)… https://t.co/BkZS1tJWLw
Meeting the Demand: Reserve command makes strides hiring full-time aircraft maintainers - https://t.co/D1jUywpZNm… https://t.co/UyF5CQeHAd
Development Teams: Shaping the future of the @USAFReserve - https://t.co/9gUNzO0gjC (Story by the @hqarpc)… https://t.co/9Xmqrk5yIe
Hurricane season continues through November - https://t.co/2FBY2658iT #ReserveReady https://t.co/iMcMz0hv0P
3D printing: Youngstown helps the Air Force test new manufacturing technique - https://t.co/jGQxkTXXXe (Story by th… https://t.co/Wd4GDIsnTp
Looking for trouble: @53rdWRS (Hurricane Hunters ) have a long history of tracking storms - https://t.co/plir5S20AZ… https://t.co/tHo1eMDs2C
Pep talks and Pepto-Bismol: Reserve Citizen Airmen care for cadets - https://t.co/EA2vOLo1Z9 (Story by the @445AW)… https://t.co/zGI5Izd8dr
Carpathian Summer: #ReserveCitizenAirmen strengthen bond with Romanian air force - https://t.co/Ax8884BjMO… https://t.co/Fp6NiBRzEd
Techno Tigresses: Seymour Johnson encourages young girls interested in #STEM - https://t.co/SujNa9YNss… https://t.co/zPUO9G7i7T
Patriot Warrior 2019: Citizen Airmen hone their skills at Air Force Reserve Command’s premier exercise -… https://t.co/Ti0fRUYv9C
‘Another arrow in the quiver’: Laser-guided bombs are back in the belly of the B-52 -https://t.co/4NsWsqCxSV… https://t.co/J8GFaU6MjB
A1 support team to be available on primary UTA weekends - https://t.co/JYNmyBoWf5 #ReserveReady #ReserveReform https://t.co/tkCICFRdOZ